FLASH ARM

FLASH ARM 簡介
FLASHER ARM主要是為了針對微處理器片上或是外部Flash和ARM內核的編程工具。
為燒寫Flash目標而設計了J-Flash 和 Stan-alone。Flasher ARM具有所有J-Link的功能。
通過USB或是RS232串口連接PC?？蛇\(yùn)行在Microsoft Windows 2000, Windows XP, Windows 2003 ,Windows Vista，Windows 7,Windows 8或Windows 10。 內置有20引腳的JTAG連接器, 此連接器與ARM標準20引腳連接器兼容。 通常ARM閃存器支持外部閃存編程， 如并行NOR閃存， 串行NOR閃存， NAND閃存和數據閃存。 ARM閃存器可通過自動測試器遠程控制， 不需連接至電腦和ARM閃存器電腦程序， 產品自身配有額外的硬件控制功能。

Flasher ARM 品牌：segger

Flasher ARM產地：美國
 

功能特征：

1. ?獨立式JTAG/SWD編程器
2. ?以太網接口
3. ?支持內部和外部閃存設備
4. ?2年免費支持軟件升級
5. ?64MB存儲器用于存儲目標程序
6. ?支持串行與目標程序
7. ?數據文檔可升級為海量存儲或通過J-Flash
8. ?目標接口有：JTAG/SWD
9. ?通過USB供電,不需其它電源
10. ?可被用做J-Link (JTAG仿真器), 下載速度高達720K字節/妙
11. ?編程速度介于30K字節/秒至300K字節/秒, 具體視目標硬件而定
12. ?不使用 PC program可通過ASCII命令直接控制Flasher 

Flasher ARM

Flash Programmer for ARM and Cortex cores

Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and ARM core. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone. In addition to that Flasher ARM has all of the J-Link functionality. Flasher ARM connects via USB, Ethernet or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8 or Windows 10 and has a built-in 20-pin JTAG connector, which is compatible with the standard 20-pin connector defined by ARM.

Features

·Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)

·Ethernet interface

·Supports internal and external flash devices

·Wide range of devices are supported. For a complete list, 

·Free software updates¹, 2 years of support

·64 MB memory for storage of target program

·Serial in target programming supported

·Data files can be updated as mass storage or via J-Flash

·Target interface: JTAG / SWD

·No power supply required, powered through USB

·Can be used as J-Link (JTAG emulator) with a download speed of up to 1 MByte/second

·Programming speed typically between 30 KB/second and 1 MByte/second. Max. programming speed highly depends on target hardware and max. programming speed of the flash itself

·ASCII command interface to control Flasher without the use of PC program

·Authorized Flashing allows to limit the number of flash programming cycles and to protect the Flasher against non-authorized access in case of external production.